Motorcycle Specification |
|
|
Overall dimension (length × wide × Height) mm |
2020×660×1050mm |
Wheelbase mm |
1210 |
Minimum ground clearance mm |
140 |
Seat cushion height mm |
770 |
Operating handle return angle (left/right) |
Left 39 degrees locking Angle 35 degrees right 37 degrees locking Angle 31 degrees |
Minimum turning radius mm |
4010 left and 4650 right |
Final transmission ratio |
15:40 |
Climbing slope |
≥20° |
Seats |
2 |
Shift mode |
Four-speed semi-rotation |
Fuel tank volume L |
4 |
Fuel type |
93# |
Rated maximum load kg |
150 |
Net weight kg |
108 |
Curb weight Kg |
112 |
Maximum load total kg |
262 |
Maximum speed Km/h |
85 |
Braking performance m |
≤7m/30km/h |
Starting performance S |
≤15S |
Rated power Kw/r/min |
4.9KW |
Economic fuel consumption L/100Km |
1.6 |
Brake |
front |
disc brake |
rear |
disc brake |
Brake operation |
front |
Hand brake |
rear |
foot brake |
wheel |
Aluminum wheel |
spoke wheel size |
front:1.85×17 rear :1.85×17 |
tyre |
Inner and outer tyre |
tyre size |
front:2.75-17 rear:3.25-17 |
Tyre pressure (front/rear) Kpa |
280/280 |
Specification and illumination of large bulb |
12V-35W/35W ≥10000cd |
Steering bulb specification |
12V-10W |
Battery specification |
12N7B-4B/ Water Bottle /150*87*95/ with electrolyte /HYOSOW |
二、 ENGINE SPECIFICATION |
Engine type |
Four-stroke, air-cooled, single-cylinder, Horizontal type |
Magneto type |
12V/level 6/full wave, |
Stroke mm |
49.5 |
Cylinder diameter mm |
52.4 |
Working volume of cylinder ml |
106.7 |
Compression ratio |
9.0:1 |
Fuel grade |
93 # gasoline |
Total oil capacity L |
0.9 |
Spark plug model |
A7TC/A7RTC |
Spark plug gap mm |
0.6~0.7 |
Valve clearance mm |
0.05±0.02mm |
Starting mode |
Electric start/kick start |
Lubricating oil grade |
15W/40 |
Lubrication method |
Splash pressure lubrication |
Ignition mode |
C.D.I |
Carburetor model |
PZ19 |
Carburetor type |
Horizontal suction plunger type |
Transmission type |
Usually engaged, four gear reciprocating |
Clutch type |
Multi-disc oil bath manual clutch |
Primary gear ratio |
3.722 |
Gearshift ratio |
i1=2.833 ,i2=1.706.i3=1.238,i4=0.958 |
Output transmission mode |
Chain drive |
Rotation direction of output shaft |
Face the output shaft and rotate counterclockwise |
Overall dimension (length × wide × Height) mm |
460×300×260 |
Net mass Kg |
21±1 |
Magneto ignition advance angle |
15º±2º |
Rated power and corresponding speed kW (r/min ± 5%) |
|
Maximum net power and corresponding speed kW (r/min ± 5%) |
4.8KW/8000±500r/min |
Maximum torque and corresponding speed N.m (r/min ± 5%) |
6.5N.m/5000±500r/min |
The minimum fuel consumption rate is less than g/Kw. h |
367g/KW.h |